PVS-69 Gen 4 Alpha Parts Kit

This is the Parts Kit for the PVS-69 Gen 4 Alpha 1.2 Housing and Battery Pack (choose from analog or digital). DOES NOT INCLUDE PVS69 HOUSING OR BATTERY PACK HOUSING! 

Note: The Alpha 1.2 Housing has a Stow-Off feature where it cuts power to the tube when in the Stow Position (UP). There is a design flaw in this feature that does not provide a stable and reliable power supply to the tube. Therefore, I will not be providing the necessary parts for this as that adds another failure point and headache that would be best avoided. The Alpha 1.2 also does not have the 4 brass washers between the pods and bridge. That is for the Alpha 1.1 and 1.3. Everything else should work as intended.

Housing Kit:

• - 4x Bolts
• - 4x Nuts
• - 8x Washers
• - 8x Bolt Head/Nut Covers
• - 2x Tube PCB
• - 1x Bridge PCB
• - 4x Leaf Springs
• - 1x M3 Heatset Insert + 1x M3 Bolt
• - 1x Power Switch
• - 1x Switch Cover
• - 14x Objective/Ocular Set Screws
• - 1x 18awg 12" Red/Black Wires
• - 1x Female DC Port
• - 1x Tube Retaining Ring Spanner Wrench

Battery Pack Kit:

• - 1x 3ft Angled Male DC Plug
• - 1x Bottom Battery Pack Wire Boot
• - 1x 3vdc Battery Pack PCB or 7vdc Battery Pack PCB
• - 1x 6in Solid Copper Wire
• - 4x Pogo Pins
• - 4x Battery Springs

Misc:

• - 1x Loctite 242
• - 1x Foil Tape

If you would like to add some cheaper alternative lenses check here DIY Lenses